Motorola WS5100 Series, Cli Reference Manual

Page: 194 / 492

WS5100 Series Switch CLI Reference Guide 5-30
name-server (A.B.C.D) Specifies the DNS server for the DHCP client. A maximum
of 6 name servers can be configured. Servers are tried in the
order entered
• A.B.C.D – IP address of DNS server.
nat Defines Network Address Translation (NAT) values
(inside|outside)
[destination|source]
static <A.B.C.D> [<1-
65535>
(tcp|udp)|<A.B.C.D>]
• (inside|outside) – Specifies the inside/outside address
translation
• [destination|source] – Destination/source
address translation.
• static <A.B.C.D> – Specifies the static
local (global mapping) for the inside local
IP address
• <1-65535> (tcp|udp) – Inside local Port.
Select tcp or udp
route
(<A.B.C.D>|< A.B.C.D/M
>)
<next-hop>
Adds a static route entry in the routing table
• A.B.C.D – IP destination prefix.
• A.B.C.D/M – IP destination prefix.
• <next-hop> – IP address of the next hop used
to reach the destination
routing Turns on IP routing.
ssh Secured Shell (SSH) server.
• port <0-65535> – Listening port. Set between 0-65536
• rsa (keypair-name) – RSA encryption key used for
confiuring RSA keypair
telnet (port) <0-65535> Telnet server.
• port <0-65535> – Defines the listening port
ID. The value can be anything between
0-65535