Motorola WS5100 Series, Cli Reference Manual

Page: 428 / 492

WS5100 Series Switch CLI Reference Guide 20-10
20.1.9 broadcast-tx-speed
Wireless Configuration Commands
Configure the rate at which broadcast and multicast traffic is transmitted between the
switch and mobile unit
Syntax
broadcast-tx-speed(range|throughput)
Parameters
Example
WS5100(config-wireless)#broadcast-tx-speed range
WS5100(config-wireless)#
WS5100(config-wireless)#broadcast-tx-speed throughput
WS5100(config-wireless)#
20.1.10 client
Wireless Configuration Commands
Use this command to configure a wireless client. This command creates an exclude-list or
include list. Creating a list moves the user to a new mode
("
config-wireless-client-list
"). Refer to config-wireless-client-list on page 20-12
for a
(config-wireless-client-list)
command summary
Syntax
client {exclude-list|include-list}(NAME)
Parameters
range Uses a lowest basic rate. Provides maximum range
throughput Uses a highest basic rate. Provides maximum throughput
(default)
exclude-list Sets the wireless client exclude list configuration. A MU
NAC check is conducted, except for those in the exclude
list. Devices in the exclude list will not have a NAC check
performed