WS5100 Series Switch CLI Reference Guide
16-10
Usage Guidelines
When creating a Port ACL, the switch (by default) does not permit an ethertype WISP.
Create a rule to allow WISP to adopt access ports. Use the following command to adopt
access ports:
permit any any type wisp
The permit command in the MAC ACL disallows traffic based on layer 2 (data-link layer)
information. A MAC access list permits traffic from a source MAC address or any MAC
address. It also has an option to allow traffic from a list of MAC addresses (based on the
source mask).
The MAC access list can be configured to allow traffic based on VLAN information,
ethernet type. Common types include:
• arp
• wisp
• ip
• 802.1q
The switch (by default) does not allow layer 2 traffic to pass through the interface. To
adopt an access port through an interface, configure an access control list to allow an
ethernet wisp.
rule-precedence
<1-5000>
Defines an access list entry precedence
type(
<1-
65535>
|arp|ip|ipv6|vlan|wisp)
Sets an ethertype
vlan
<1-4095>
Sets the VLAN ID
NOTE:
Use the following command to attach a MAC access list to a
port on a layer 2 interface:
mac access-group <acl number/name> in
NOTE:
To apply an IP based ACL to an interface, a MAC access list
entry to allow ARP is mandatory. A MAC ACL always takes precedence
over IP based ACLs.
Summary of Contents for WS5100 Series
