manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 712

13 - 106WiNG 5 Access Point System Reference Guide

13.3.18 DHCP Server

Access Point Statistics

AP-7131, AP-6532 and AP-7161 model access points contain an internal 

Dynamic Host Configuration Protocol 

(DHCP) 

server. DHCP can provide IP addresses automatically. DHCP is a protocol that includes mechanisms for IP address 
allocation and delivery of host-specific configuration parameters (IP address, network mask gateway etc.) from a 
DHCP server to a host.

To view DHCP server statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen), expand the default node and select 

an access point for statistical observation.

3. Select 

DHCP 

and expand the menu to reveal its sub menu items

.

Platform

Displays the model number of the LLDP capable device.

Port ID

Displays the identifier for the local port.

TTL

Displays the time to live for each LLDP connection.

Clear Neighbors

Select 

Clear Neighbors 

to remove all known LDP neighbors from the table.

Refresh

Select 

Refresh 

to update the statistics counters to their latest values.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands