manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 693

Statistics 12 - 87

13.3.13.6 OSPF State

OSPF

An OSPF enabled access point sends hello packets to discover neighbors and elect a designated router for dynamic links. 
The hello packet includes link 

state

 data maintained on each access point and is periodically updated on all OSPF 

members. The access point tracks link state information to help assess the health of the OSPF dynamic route.

To view OSPF state statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen), expand the default node and select an 

access point for statistical observation.

3. Select 

OSPF

. 

4. Select the

 OSPF State 

tab.

Figure 13-46

Access Point OSPF - State tab

5. The 

OSPF State 

tab describes the following:

OSPF state

Displays the OSPF link state amongst neighbors within the OSPF topology. 
Link state information is maintained in a

 link-state database

 (LSDB) which is 

a tree image of the entire network topology. Identical copies of the LSDB are 
periodically updated through flooding on all OSPF supported nodes. Flooding 
is the part of the OSPF protocol that distributes and synchronizes the 
link-state database between OSPF routers.

OSPF ignore 
state count

Lists the number of times state requests have been ignored between the 
access point and its peers within this OSPF supported broadcast domain.

OSPF ignore 
state monitor 
timeout

Displays the timeout that, when exceeded, prohibits the access point from 
detecting changes to the OSPF link state.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands