manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 71

Device Configuration 5 - 11

5.3.3 Profile Adoption (Auto Provisioning) Configuration

Adoption is the process an access point uses to discover Virtual Controller APs available in the network, pick the most 
desirable Virtual Controller, establish an association with the and optionally obtain an image upgrade, obtains its 
configuration and considers itself provisioned. This is a configurable activity that can be supported within an access point 
profile and applied to other access points (of the same model) supported by the profile. 

At adoption, an access point solicits and receives multiple adoption responses from Virtual Controller APs available on the 
network. These adoption responses contain loading policy information the access point uses to select the optimum Virtual 
Controller AP for adoption.

To define the access point profile’s adoption configuration:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

.

3. Select 

System Profile 

from the options on left-hand side of the UI.

4. Select 

Adoption

.

NOTE: 

An access point configuration does not need to be present for an auto 

provisioning (adoption) policy to take effect. Once adopted, and the access point’s 
configuration is defined and applied by the Virtual Controller, the auto provisioning policy 
mapping does not have impact on subsequent adoptions by the same device.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands