manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 706

13 - 100WiNG 5 Access Point System Reference Guide

13.3.17.4 IGMP

Network

Internet Group Management Protocol 

(IGMP) is a protocol used for managing members of IP multicast groups. The 

access point listens to IGMP network traffic and forwards the IGMP multicast packets to radios on which the 
interested hosts are connected. On the wired side of the network, the access point floods all the wired interfaces. 
This feature reduces unnecessary flooding of multicast traffic in the network. 

To view IGMP statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen), expand the default node and select 

an access point for statistical observation.

3. Select 

Network 

and expand the menu to reveal its sub menu items

.

4. Select 

IGMP

Figure 13-53

Access Point Network - IGMP screen

5. The

 Group

 table displays the following:

VLAN

Displays the group VLAN where the multicast transmission is conducted.

Group Address

Displays the Multicast Group ID supporting the statistics displayed. This 
group ID is the multicast address hosts are listening to.

Port Members

Displays the ports on which multicast clients have been discovered by the 
access point. For example, ge1, radio1, etc.

Version

Displays each listed group’s IGMP version compatibility as either version 1, 2 
or 3.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands