manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 384

6 - 36 WiNG 5 Access Point System Reference Guide

assistance in partitioning local versus remote users and how to best accommodate each. Remote user information 
can be archived to a remote location for periodic network and user permission administration.

To configure WLAN accounting settings:

1. Select 

Configuration 

> 

Wireless 

> 

Wireless LANs

 to display a high-level display of the existing WLANs 

available to the wireless controller managed network.

2. Select the

 Add

 button to create an additional WLAN, or 

Edit

 to modify the properties of an existing WLAN.

3. Select 

Accounting

.

Figure 6-13

WLAN Accounting screen

4.  Set the following 

Syslog Accounting

 information:

Enable System Log 
Accounting

Select this option for the access point to generate accounting records in 
standard syslog format (RFC 3164). The feature is disabled by default.

Syslog Host

Specify the IP address (or hostname) of the external syslog host where 
accounting records are routed.

Syslog Port

Use the spinner control to set the destination UDP port of the external 
syslog host where accounting records are routed. The default port is 514.

Proxy Mode

Use the drop-down menu to define how syslog accounting is conducted. 
Options include 

None

, 

Through Wireless Controller

 and 

Through RF 

Domain Manager.

Format

Select the format used to include (pack) the MAC address in a syslog request. 
Options include 

No Delimiter (aabbccddeeff)

, 

Colon Delimiter 

(aa:bb:cc:dd:ee:ff)

, 

Dash Delimiter (aa-bb-cc-dd-ee-ff)

, 

Dot Delimiter per four 

(aabb.ccdd.eef)

 and 

Middle Dash Delimiter (aabbcc-ddeeff)

. The default 

setting is Dash Delimiter (aa-bb-cc-dd-ee-ff).

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands