manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 594

12 - 30 WiNG 5 Access Point System Reference Guide

7. Select 

OK 

to import the defined RSA key. Select 

Cancel 

to revert the screen to its last saved configuration.

8. To optionally export a RSA key to a remote location, select the 

Export

 button from the RSA Keys screen.

9. Export the key to a redundant RADIUS server so it can be imported without generating a second key. If there’s 

more than one RADIUS authentication server, export the certificate and don’t generate a second key unless you 
want to deploy two root certificates.

Figure 12-19

Export RSA Key screen

10.Define the following configuration parameters required for the Export of the RSA key:

IP Address

Enter IP address of the server used to import the RSA key. This option is not 
valid for 

cf

, 

usb1

 and 

usb2

.

Hostname

Provide the hostname of the server used to import the RSA key. This option is 
not valid for 

cf

, 

usb1

 and 

usb2

.

Path

Specify the path to the RSA key. Enter the complete relative path to the key on 
the server.

Key Name

Enter the 32 character maximum name assigned to the RSA key. 

Key Passphrase 

Define the key passphrase used by the server. Select the 

Show

 textbox to 

expose the actual characters used in the passphrase. Leaving the checkbox 
unselected displays the passphrase as a series of asterisks “*”.

URL 

Provide the complete URL to the location of the key. If needed, select 

Advanced

 

to expand the dialog to display network address information to the location of 
the target key. The number of additional fields that populate the screen is also 
dependent on the selected protocol.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands