manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 656

13 - 50 WiNG 5 Access Point System Reference Guide

13.3.4.3 Pending Adoptions

Adoption

The 

Pending Adoptions 

screen displays a list of devices adopted to this access point or access points in the process 

of adoption.

To view pending access point statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen), expand the default node and select 

an access point for statistical observation. 

3. Expand the 

Adoption 

menu item.

4. Select 

Adopted AP History

.

Figure 13-27

 Access Point - Pending Adoptions screen

5. The 

Adopted Devices

 screen provides the following

MAC Address

Displays the MAC address of the device pending adoption.

Type

Displays the AP type (AP650, AP7131, AP6511, AP6532 etc.).

IP Address

Displays the current IP Address of the device pending adoption.

VLAN

Displays the current VLAN used by the device pending adoption.

Reason

Displays the status as to why the device is still pending adoption and has not 
yet successfully connect to this access point.

Discovery Option

Displays the discovery option code for each AP listed pending adoption.

Last Seen

Displays the date and time stamp of the last time the device was seen. Click the 
arrow next to the date and time to toggle between standard time and UTC.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands