manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 563

Diagnostics 11 - 9

Figure 11-7

UI Debugging screen - Schema Browser

The Scheme Browser displays the Configuration tab by default.The Schema Browser displays two fields (regardless of 
the 

Configuration

, 

Statistics

 or 

Actions 

tab selected). Use the left field to navigate the schema by expanding and 

collapsing directories. Selecting a a node on the left displays node details on the right. The Schema Browser does not 
display information in real time. It only displays the data on the device when last updated.

3. Expand a configuration parameter to review its settings. The 

Configuration

 tab provides an ideal place to verify if the 

last saved configuration differs from default settings, or has been erroneously changed in respect to the access point’s 
intended configuration.

4. Select the 

Statistics 

tab to assess performance data and statistics for a target device. 

Use Statistics data to assess whether the device is optimally configured in respect to its intended deployment 
objective. Often the roles of radio supported devices and wireless clients change as additional devices and radios are 
added to the access point managed network.

5. Select the 

Actions 

tab to display schema for any action that can be configured.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands