manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 641

Statistics 12 - 35

13.2.11 Captive Portal

RF Domain

A captive portal technique a client connected to a RF Domain member access point to use a customized set of Web pages 
(for authentication purposes) before being granted access to the access point managed Internet. Thus, a captive portal 
turns a Web browser into an authentication device. 

To view the RF Domain captive portal statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select the 

default 

item from under the System node on the top, left-hand side, of the screen.

3. Select 

Captive Portal

 from the RF Domain menu.

Figure 13-20

RF Domain - Captive Portal screen

4. The screen displays the following 

Captive Portal

 data for RF Domain member access points and their requesting 

clients:

Client MAC

Displays the MAC address of each listed client using its connected RF Domain 
member access point for captive portal access.

Client IP

Displays the IP address of each listed client using its connected RF Domain 
member access point for captive portal access.

Captive Portal

Lists the name of the captive portal currently being utilized by each listed 
client.

Authentication

Displays the authentication status of requesting clients attempting to connect 
to the Captive Portal via a RF Domain member access point.

WLAN

Displays the name of the RF Domain member access point WLAN the Captive 
Portal is utilized in.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands