manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 524

9 - 32 WiNG 5 Access Point System Reference Guide

5. Set the 

Schedule

 to configure access times and dates. 

6. Click the 

OK

 to save the changes. Select 

Reset

 to revert to the last saved configuration.

VLAN

Select this option (and use the slider) to assign a specific VLAN to this RADIUS 
user group. Ensure Dynamic VLAN assignment (Single VLAN) is enabled for the 
WLAN for the VLAN to work properly. For more information, see 

Basic WLAN Configuration on page 6-4

.

WLAN SSID

Assign a list of SSIDs (users) the RADIUS group are allowed to associate to. 
An SSID cannot exceed 32 characters. Assign WLAN SSIDs representative of 
users a guest user will need to access. The parameter is not available if this 
RADIUS group has been defined as a management group.

Rate Limit from Air

Select the checkbox to set an uplink rate limit for managed clients within this 
RADIUS group. Use the spinner to set value from 100-1,000,000 kbps. Setting 
a value of 0 disables rate limiting.

Rate Limit to Air

Select the checkbox to set a downlink rate limit from clients within this 
RADIUS group. Use the spinner to set value from 100-1,000,000 kbps. Setting 
a value of 0 disables rate limiting.

Management Group

Select this option to designate the RADIUS group as a management group. If 
set as management group, assign a role to the members of the group using the 

Access

 drop-down menu, allowing varying levels of administrative rights. This 

feature is disabled by default. 

Role

If a group is listed as a management group, assign a unique role. Available 
roles include:

monitor - 

Read-only access.

helpdesk - 

Helpdesk/support access

network-admin 

- Wired and wireless access

security-admin 

- Grants full read/write access 

system-admin 

-

 

System administrator access

Time Start

Use the spinner control to set the time (in HH:MM format) RADIUS group 
members are allowed to login and access RADIUS server resources (for 
example, 14:45 = 2:45). Select either the 

AM 

or 

PM

 radio button to set the time 

as morning or evening.

Time Stop

Use the spinner control to set the time (in HH:MM format) RADIUS group 
members are denied access to RADIUS server resources (for example, 15:45 = 
3:45). Select either the 

AM 

or 

PM

 radio button to set the time as morning or 

evening. If already logged in, the RADIUS group user is deauthenticated from 
the WLAN.

Days

Select the day(s) of the week RADIUS group members can access RADIUS 
resources.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands