Motorola WiNG 5 System Reference Manual Download Page 25

Page: 25 / 802

Web UI Features 2 - 9

2.2.7 Configuration Operation Icons



Icon Glossary

The following icons are used to define configuration operations:

2.2.8 Access Type Icons



Icon Glossary

The following icons display a user access type:

Panic Snapshots

– Indicates a panic snapshot has been generated. A panic

snapshot is a file that records the status of all the processes and memory
when a failure occurs.

UI Debugging

– Select this icon/link to view current NETCONF messages.

View UI Logs

– Select this icon/link to view the different logs generated by

the user interface, FLEX and the error logs.

Revert

– When selected, any changes made after the last saved configuration

are restored back to the last saved configuration.

Commit

– When selected, all changes made to the configuration are written

to the access point. Once committed, changes cannot be reverted.

Save

– When selected, changes are saved to the access point’s configuration.

Web UI

– Defines a Web UI access permission. A user with this permission

is permitted to access an associated device’s Web UI.

Telnet

– Defines a TELNET access permission. A user with this permission is

permitted to access an access point using TELNET.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5

Reviews:

Brands by name

Popular brands

Motorola WiNG 5, System Reference Manual

Search results

Summary of Contents for WiNG 5

Reviews:

Brands by name

Popular brands