manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 224

5 - 164 WiNG 5 Access Point System Reference Guide

For more information on the certification activities, refer to the following:

•

Certificate Management

•

RSA Key Management

•

Certificate Creation

•

Generating a Certificate Signing Request

5.6.1 Certificate Management

Assigning Certificates

If not wanting to use an existing certificate or key with a selected device, an existing stored certificate can be 
leveraged from a different device. Device certificates can be imported and exported to a secure remote location for 
archive and retrieval as required for application to other devices.

To configure trustpoints for use with certificates:

1. Select

 Launch Manager

 from either the

 HTTPS Trustpoint, SSH RSA Key

, or 

RADIUS Server Certificate 

parameters.

Figure 5-92

Certificate Management - Trustpoints screen

The Certificate Management screen displays with the Trustpoints section displayed by default. 

2. Select a device from amongst those displayed to review its certificate information. 

Refer to the

 Certificate Details

 to review the certificate’s properties, self-signed credentials, validity period and 

CA information. 

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands