manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 167

Device Configuration 5 - 107

27. Select 

OK

 to save the updates made to the Crypto Map Entry screen. Selecting 

Reset

 reverts the screen to its last 

saved setting.

28. Select 

Remote VPN Server

.

Use this screen to define the server resources used to secure (authenticate) a remote VPN connection with a target 
peer.

IP Firewall Rules

Use the drop-down menu to select the access list (ACL) used to protect IPSec 
VPN traffic. New access/deny rules can be defined for the crypto map by 
selecting the 

Create

 icon, or an existing set of firewall rules can be modified 

by selecting the 

Edit

 icon.

IPSec Transform Set

Select the transform set (encryption and hash algorithms) to apply to this 
crypto map configuration. 

Mode

Use the drop-down menu to define which mode (

pull

 or 

push

) is used to 

assign a virtual IP. This setting is relevant for IKEv1 only, since IKEv2 always 
uses the configuration payload in 

pull

 mode. The default setting is push.

Local End Point

Select this radio button to define an IP address as a local tunnel end point 
address. This setting represents an alternative to an interface IP address.

Perfect Forward 
Secrecy (PFS)

PFS is key-establishment protocol, used to secure VPN communications. If 
one encryption key is compromised, only data encrypted by that specific key 
is compromised. For PFS to exist, the key used to protect data transmissions 
must not be used to derive any additional keys. Options include 

None

, 

2

, 

5

 

and 

14

. The default setting is None.

Lifetime (kB)

Select this option to define a connection volume lifetime (in kilobytes) for the 
duration of an IPSec VPN security association. Once the set volume is 
exceeded, the association is timed out. Use the spinner control to set the 
volume from 500 - 2,147,483,646 kilobytes.

Lifetime (seconds)

Select this option to define a lifetime (in seconds) for the duration of an IPSec 
VPN security association. Once the set value is exceeded, the association is 
timed out. The available range is from 120 - 86,400 seconds. The default 
setting is 120 seconds.

Protocol

Select the security protocol used with the VPN IPSec tunnel connection. SAs 
are unidirectional, existing in each direction and established per security 
protocol. Options include 

ESP

 and 

AH

. The default setting is ESP.

Remote VPN Type

Define the remote VPN type as either 

None

 or 

XAuth

. XAuth (extended 

authentication) provides additional authentication validation by permitting 
an edge device to request extended authentication information from an IPSec 
host. This forces the host to respond with additional authentication 
credentials. The edge device respond with a failed or passed message. The 
default setting is XAuth.

Manual Peer IP

Select this option to define the IP address of an additional 
encryption/decryption peer.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands