manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 362

6 - 14 WiNG 5 Access Point System Reference Guide

6.1.2.5 WPA/WPA2-TKIP

Configuring WLAN Security

Wi-Fi Protected Access 

(WPA) is an encryption scheme specified in the IEEE 

Wireless Fidelity

 (Wi-Fi) standard, 

802.11i. WPA provides more sophisticated data encryption than WEP. WPA is designed for corporate networks and 
small-business environments where more wireless traffic allows quicker discovery of encryption keys by an 
unauthorized person.

The encryption method is 

Temporal Key Integrity Protocol

 (TKIP). TKIP addresses WEP’s weaknesses with a re-keying 

mechanism, a per-packet mixing function, a message integrity check, and an extended initialization vector, however 
TKIP also has vulnerabilities.

Wi-Fi Protected Access 2

 (WPA2) is an enhanced version of WPA. WPA2 uses the 

Advanced Encryption Standard

 

(AES) instead of TKIP. AES supports 128-bit, 192-bit and 256-bit keys. WPA/WPA2 also provide strong user 
authentication based on 802.1x EAP.

To configure WPA/WPA2 encryption on a WLAN:

1. Select 

Configuration

 > 

Wireless 

>

 Wireless LANs 

to display a high-level display of the existing WLANs. 

2. Select the 

Add

 button to create an additional WLAN or select an existing WLAN and select

 Edit 

to modify the 

properties of an existing WLAN.

3. Select 

Security

.

4. Select the

 WPA/WPA2-TKIP 

radio button from within the Select Encryption field.

The screen populates with the parameters required to define a WLAN WPA/WPA2-TKIP configuration for the 
WLAN.

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands