manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website manualshive.com, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

Statistics   13 - 79

The 

Traffic

 

table displays the following:

The 

Errors

 

table displays the following:

Good Octets Sent

Displays the number of octets (bytes) with no errors sent by the interface.

Good Octets Received

Displays the number of octets (bytes) with no errors received by the interface.

Good Packets Sent

Displays the number of good packets transmitted.

Good Packets Received

Displays the number of good packets received.

Mcast Pkts Sent

Displays the number of multicast packets sent through the interface.

Mcast Pkts Received

Displays the number of multicast packets received through the interface.

Ucast Pkts Sent

Displays the number of unicast packets sent through the interface.

Ucast Pkts Received

Displays the number of unicast packets received through the interface.

Bcast Pkts Sent

Displays the number of broadcast packets sent through the interface.

Bcast Pkts Received

Displays the number of broadcast packets received through the interface.

Packet Fragments

Displays the number of packet fragments transmitted or received through the interface.

Jabber Pkts

Displays the number of packets transmitted through the interface larger than the MTU.

Bad Pkts Received

Displays the number of bad packets received through the interface.

Collisions

Displays the number of collisions over the selected interface.

Late Collisions

A late collision is any collision that occurs after the first 64 octets of data have been sent. 
Late collisions are not normal, and usually the result of out of specification cabling or a 
malfunctioning device.

Excessive Collisions

Displays the number of excessive collisions. Excessive collisions occur when the traffic 
load increases to the point a single Ethernet network cannot handle it efficiently. 

Drop Events

Displays the number of dropped packets transmitted or received through the interface.

Tx Undersize Pkts

Displays the number of undersized packets transmitted through the interface.

Oversize Pkts

Displays the number of oversized packets transmitted through the interface.

MAC Transmit Error

Displays the number of failed transmits due to an internal MAC sublayer error (that’s not 
a late collision), due to excessive collisions or a carrier sense error.

MAC Receive Error

Displays the number of received packets that failed due to an internal MAC sublayer 
(that’s not a late collision), an excessive number of collisions or a carrier sense error.

Bad CRC

Displays the CRC error. The CRC is the 4 byte field at the end of every frame. The receiving 
station uses it to interpret if the frame is valid. If the CRC value computed by the interface 
does not match the value at the end of frame, it is considered as a bad CRC.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Super Circuits WIP5800N-WR Quick Start Programming Instructions preview
WIP5800N-WR
Brand: Super Circuits Pages: 4
Hamlet Wireless Access Point 150 User Manual preview
Wireless Access Point 150
Brand: Hamlet Pages: 172
Malmbergs CSW201 Instruction Manual preview
CSW201
Brand: Malmbergs Pages: 6
MikroTik LtAP RB912R-2nD-LTm&R11e-4G User Manual preview
LtAP RB912R-2nD-LTm&R11e-4G
Brand: MikroTik Pages: 7
Logicube Thunderbolt 3/USB-C I/ O CARD Quick Start Manual preview
Thunderbolt 3/USB-C I/ O CARD
Brand: Logicube Pages: 5
CNET CAR-854 Quick Installation Manual preview
CAR-854
Brand: CNET Pages: 2
Amigo APH50C Quick Installation Manual preview
APH50C
Brand: Amigo Pages: 9
3onedata IAP3600S-225-2GT-PDP12 48 Quick Installation Manual preview
IAP3600S-225-2GT-PDP12 48
Brand: 3onedata Pages: 4
Edimax Pro AP 1 How To Set Up preview
Pro AP 1
Brand: Edimax Pages: 3
T-Mobile tm-g5240 - T-mobile Hotspot Wireless User Manual preview
tm-g5240 - T-mobile Hotspot Wireless
Brand: T-Mobile Pages: 95
AmbiCom WL250N-AR Quick Installation Manual preview
WL250N-AR
Brand: AmbiCom Pages: 8
EnGenius ENS500-ACv2 User Manual preview
ENS500-ACv2
Brand: EnGenius Pages: 71
PHICOMM FIR series Quick Start Manual preview
FIR series
Brand: PHICOMM Pages: 5
Broadxent VF0180 Manual preview
VF0180
Brand: Broadxent Pages: 27
Advanced radio cells AR1255 Physical Planning And Installation Manual preview
AR1255
Brand: Advanced radio cells Pages: 48
Ebyte E220-400MM22S User Manual preview
E220-400MM22S
Brand: Ebyte Pages: 14
Ebyte E22-230T30D User Manual preview
E22-230T30D
Brand: Ebyte Pages: 27
Zonet ZSR4154WE User Manual preview
ZSR4154WE
Brand: Zonet Pages: 54

Brands by name

Popular brands

Load more brands