manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

Share
Download
Motorola WiNG 5.6 Reference Manual Download Page 834

13 - 26  WiNG 5.6 Access Point System Reference Guide 

13.2.7 Wireless LANs

RF Domain Statistics

The 

Wireless LANs

 screen displays the name, network identification and radio quality information for the WLANs currently 

being utilized by RF Domain members. 

To view wireless LAN statistics for RF Domain members:

1. Select the 

Statistics

 menu from the Web UI.

2. Select a RF Domain from under the 

System

 node on the top, left-hand side, of the screen.

3. Select 

Wireless LANs 

from the 

RF Domain

 menu.

Figure 13-16

RF Domain - Wireless LANs screen

The 

Wireless LANs 

screen displays the following:

WLAN Name

Displays the name assigned to each WLAN upon its creation within the network.

SSID

Displays the 

Service Set ID

 (SSID) assigned to the WLAN upon its creation within the network.

Traffic Index

Displays the traffic utilization index of each listed WLAN, which measures how efficiently the 
traffic medium is used. It’s defined as the percentage of current throughput relative to the 
maximum possible throughput. Traffic indices are: 0 – 20 (very low utilization), 20 – 40 (low 
utilization), 40 – 60 (moderate utilization), and 60 and above (high utilization). 

Radio Count

Displays the number of radios deployed in each listed WLAN by RF Domain member devices.

Tx Bytes

Displays the average number of packets (in bytes) sent on each listed RF Domain member 
WLAN.

Tx User Data Rate

Displays the average data rate per user for packets transmitted on each listed RF Domain 
member WLAN.

Rx Bytes

Displays the average number of packets (in bytes) received on each listed RF Domain member 
WLAN.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands