manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

Share
Download
Motorola WiNG 5.6 Reference Manual Download Page 700

9 - 40 WiNG 5.6 Access Point System Reference Guide 

5. Select

 Add

 to create a new group. To modify the settings of an existing group, select the group and click the 

Edit

 button. 

To delete an obsolete group, select the group and click the 

Delete

 button.

Role

If a group is listed as a management group, it may also have a unique role assigned. 
Available roles include:

•

monitor

 - Read-only access

•

helpdesk

 - Helpdesk/support access

•

network-admin

 - Wired and wireless access

•

security-admin

 - Grants full read/write access

•

system-admin

 - System administrator access

VLAN

Displays the VLAN ID used by the group. The VLAN ID is representative of the shared SSID 
each group member (user) employs to interoperate within the access point managed 
network (once authenticated by the local RADIUS server).

Time Start

Specifies the time users within each listed group can access local RADIUS resources.

Time Stop

Specifies the time users within each listed group lose access to local RADIUS resources.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands