manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

Share
Download
Motorola WiNG 5.6 Reference Manual Download Page 555

Wireless Configuration 6 - 89

7. Select 

OK

 to update the MeshConnex Configuration settings for this policy. Select 

Reset

 to revert to the last saved 

configuration.

8. Select the 

Security 

tab.

Mesh Point Status

To enable this mesh point, select the 

Enabled

 radio button. To disable the mesh point 

select the 

Disabled

 button. The default value is enabled.

Mesh QoS Policy

Use the drop-down menu to specify the mesh QoS policy to use on this mesh point. This 
value is mandatory. If no suitable Mesh QoS policies exist, click the create icon to create 
a new Mesh QoS policy.

Beacon Format

Use the drop-down menu to specify the format that beacons from the mesh point are sent. 
To use access point style beacons select 

access-point

 from the drop-down menu. To use 

mesh point style beacons select mesh point from the drop-down menu. The default value 
is mesh point.

Is Root

Select this option to specify the mesh point as a root.

Control VLAN

Use the spinner control to specify a VLAN to carry mesh point control traffic. The valid 
range for control VLAN is from 1 - 4094. The default value is VLAN 1.

Allowed VLAN

Specify the VLANs allowed to pass traffic on the mesh point. Separate all VLANs with a 
comma. To specify a range of allowed VLANs separate the starting VLAN and the ending 
VLAN with a hyphen. Aliases can be used to configure 

Allowed VLANs

.

Neighbor Inactivity 
Timeout

Specify a Neighbor Inactivity Timeout in 

seconds

, 

minutes

, 

hours

 or 

days

, up to a 

maximum of 1 day. 

Neighbor Inactivity Timeout

 is the allowed amount of time between 

frames received from a neighbor before their client privileges are revoked. The default 
value is 2 minutes.

Description

Enter any descriptive text about the mesh point.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands