Motorola WiNG 5.6 Reference Manual Download Page 810

Page: 810 / 1048

13 - 2 WiNG 5.6 Access Point System Reference Guide

13.1 System Statistics

Statistics

The

System

screen displays information supporting managed devices. Use this information to asses the overall state of the

devices comprising the system. Systems data is organized as follows:

•

Health

•

Inventory

•

Adopted Devices

•

Pending Adoptions

•

Offline Devices

•

Device Upgrade

•

Licenses

•

WIPS Summary

13.1.1 Health

System Statistics

The

Health

screen displays the overall performance of the managed network (system). This includes device availability, overall

RF quality, resource utilization and network threat perception.

To display the health of the network:

1. Select the

Statistics

menu from the Web UI.

2. Select the

System

node from the left navigation pane.

3. Select

Health

from the left-hand side of the UI.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.6

Reviews:

Related manuals for WiNG 5.6

Brands by name

Popular brands

Motorola WiNG 5.6, Reference Manual

Search results

Summary of Contents for WiNG 5.6

Reviews:

Related manuals for WiNG 5.6

Brands by name

Popular brands