Motorola WiNG 5.6, Reference Manual

Page: 229 / 1048

Device Configuration 5 - 143
45. Define the following IKE Dead Peer Detection settings:
46. Select OK to save the updates made to the Global Settings screen. Selecting Reset reverts the screen to its last saved
configuration.
Plain Text Deny Select global or interface to set the scope of the ACL. The default setting is global,
expanding the rules of the ACL beyond just the interface.
Enable IKE UniqueIds Select this option to initiate a unique ID check. This is disabled by default.
DPD Keep Alive Define the interval (or frequency) of IKE keep alive messages for dead peer detection.
Options include
Seconds (10 - 3,600), Minutes (1 - 60) and Hours (1). The default setting
is 30 seconds.
DPD Retries Use the spinner control to define the number of keep alive messages sent to an IPSec
VPN client before the tunnel connection is defined as dead. The available range is from
1 - 100. The default number of messages is 5.
NAT Keep Alive Define the interval (or frequency) of NAT keep alive messages for dead peer detection.
Options include
Seconds (10 - 3,600), Minutes (1 - 60) and Hours (1). The default setting
is 20 seconds.
Cookie Challenge
Threshold Use the spinner control to define the threshold (1 - 100) that, when exceeded, enables
the cookie challenge mechanism.
Crypto NAT Pool Use the drop-down menu to select the NAT pool for internal source NAT for IPSec
tunnels.