manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

Share
Download
Motorola WiNG 5.6 Reference Manual Download Page 578

7 - 10 WiNG 5.6 Access Point System Reference Guide 

3. Select 

Add

 to create a new L2TP V3 policy, 

Edit

 to modify the attributes of a selected policy or 

Delete

 to remove obsolete 

policies from the list of those available.

Figure 7-6

L2TP V3 Policy Creation 

screen

4. If creating a new L2TP V3 policy, assign it a 

Name

 up to 31 characters in length. Remember, a single L2TP V3 policy can be 

used by numerous L2TP V3 tunnels.

5. Define the following 

Policy Details

 to add a device to a list of devices sanctioned for network operation:

Force L2 Path Recovery

Indicates if L2 Path Recovery is enabled to learn servers, gateways and other network 
devices behind a L2TPV3 tunnel.

Cookie size

L2TP V3 data packets contain a session cookie which identifies the session (pseudowire) 
corresponding to it. Use the spinner control to set the size of the cookie field present within 
each L2TP V3 data packet. Options include 0, 4 and 8. The default setting is 0. If using the CLI, 
cookie size cannot be configured per session, and are the same size for all sessions with in a 
tunnel.

Hello Interval

Define an interval in either 

Seconds

 (1 - 3,600), 

Minutes

 (1 -60) or 

Hours

 (1) between L2TP V3 

hello keep alive messages exchanged within the L2TP V3 control connection. The default 
setting is 1 minute.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands