manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

Share
Download
Motorola WiNG 5.6 Reference Manual Download Page 445

Device Configuration 5 - 359

10. Select 

OK

 to save the changes and overrides made to the profile’s Management Settings. Select 

Reset 

to revert to the last 

saved configuration.

11. Select the

 Firmware

 tab from the Management menu.

Figure 5-241

Device Overrides - Management Firmware screen

12. Refer to the 

Auto Install via DHCP Option

 field to define automatic configuration file and firmware updates. 

13. Use the parameters within the 

Automatic Adopted AP Firmware Upgrade

 field to define an automatic firmware 

upgrade from a controller based file.

14. Select

 OK

 to save the changes and overrides made to the profile’s Management Firmware configuration. Select 

Reset

 to 

revert to the last saved configuration.

15. Select 

Heartbeat

 from the Management menu.

Enable Configuration Update

Select this option to enable automatic configuration file updates for the controller 
profile from a location external to the access point. 

If enabled (the setting is disabled by default), provide a complete path to the target 
configuration file used in the update.

Enable Firmware Update

Select this option to enable automatic firmware updates from a user defined remote 
location. This value is disabled by default.

Enable Controller Upgrade 
of AP Firmware

Select the access point model to upgrade using its associated Virtual Controller AP’s 
most recent firmware file for that model. This parameter is enabled by default.

Number of Concurrent 
Upgrades.

Use the spinner control to define the maximum number (1 - 20) of adopted APs that 
can receive a firmware upgrade at the same time. Keep in mind during a firmware 
upgrade, the access point is offline and unable to perform its normal wireless client 
support function until the upgrade process is complete.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands