Motorola EX-3524, Cli Reference Manual

Page: 552 / 617

Chapter 25
| IP Interface Commands
IPv6 Interface
– 552 –
Example
This example assigns a dynamic global unicast address to the switch.
Console(config)#interface vlan 1
Console(config-if)#ipv6 address autoconfig
Console(config-if)#end
Console#show ipv6 interface
VLAN 1 is up
IPv6 is stale, AUTOCONFIG is enabled
Link-Local Address:
FE80::2E0:CFF:FE00:FD/64
Global Unicast Address(es):
2002:1000:AA22:BB66::1000/64, subnet is 2002:1000:AA22:BB66::/
64[AUTOCONFIG]
valid lifetime -1 preferred lifetime -1
Joined Group Address(es):
FF02::1:FF00:1000
FF02::1:FF00:FD
FF02::1
IPv6 link MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 3
ND retransmit interval is 1000 milliseconds
Console#
Related Commands
ipv6 address (550)
show ipv6 interface (558)
ipv6 address eui-64
This command configures an IPv6 address for an interface using an EUI-64 interface
ID in the low order 64 bits and enables IPv6 on the interface. Use the
no form
without any arguments to remove all manually configured IPv6 addresses from the
interface. Use the
no form with a specific address to remove it from the interface.
Syntax
ipv6 address ipv6-prefix / prefix-length eui -64
no ipv6 address [ ipv6-prefix / prefix-length eui-64 ]
ipv6-prefix - The IPv6 network portion of the address assigned to the
interface.
prefix-length - A decimal value indicating how many contiguous bits (from
the left) of the address comprise the prefix (i.e., the network portion of the
address).
Default Setting
No IPv6 addresses are defined
Command Mode
Interface Configuration (VLAN)