Motorola EX-3524, Cli Reference Manual

Page: 215 / 617

Chapter 7
| Authentication Commands
Management IP Filter
– 215 –
Backend State Machine
State : Idle
Request Count : 0
Identifier(Server) : 2
Reauthentication State Machine
State : Initialize
802.1X Supplicant is disabled on port 1/50
Console#
Management IP Filter
This section describes commands used to configure IP management access to the
switch.
management
This command specifies the client IP addresses that are allowed management
access to the switch through various protocols. Use the
no form to restore the
default setting.
Syntax
[ no ] management { all-client | http-client | snmp-client | telnet-client }
start-address [ end-address ]
all-client - Adds IP address(es) to all groups.
http-client - Adds IP address(es) to the web group.
snmp-client - Adds IP address(es) to the SNMP group.
telnet-client - Adds IP address(es) to the Telnet group.
start-address - A single IP address, or the starting address of a range.
end-address - The end address of a range.
Default Setting
All addresses
Command Mode
Global Configuration
Table 44: Management IP Filter Commands
Command Function Mode
management Configures IP addresses that are allowed management
access GC
show management Displays the switch to be monitored or configured from a
browser PE