Motorola EX-3524, Cli Reference Manual

Page: 278 / 617

Chapter 9
| Access Control Lists
IPv6 ACLs
– 278 –
◆
An ACL can contain up to 64 rules.
Example
Console(config)#access-list ipv6 standard david
Console(config-std-ipv6-acl)#
Related Commands
permit, deny, redirect-to (Standard IPv6 ACL) (278)
permit, deny, redirect-to (Extended IPv6 ACL) (279)
ipv6 access-group (282)
show ipv6 access-list (281)
permit, deny,
redirect-to
(Standard IPv6 ACL)
This command adds a rule to a Standard IPv6 ACL. The rule sets a filter condition for
packets emanating from the specified source. Use the
no form to remove a rule.
Syntax
{ permit | deny | redirect-to interface }
{ any | host source-ipv6-address | source-ipv6-address/prefix-length }
[ time-range time-range-name ]
no { permit | deny } { any | host source-ipv6-address |
source-ipv6-address/prefix-length }
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
any – Any source IP address.
host – Keyword followed by a specific IP address.
source-ipv6-address - An IPv6 source address or network class. The address
must be formatted according to RFC 2373 “IPv6 Addressing Architecture,”
using 8 colon-separated 16-bit hexadecimal values. One double colon may
be used in the address to indicate the appropriate number of zeros
required to fill the undefined fields.
prefix-length - A decimal value indicating how many contiguous bits (from
the left) of the address comprise the prefix; i.e., the network portion of the
address. (Range: 0-128)
time-range-name - Name of the time range. (Range: 1-30 characters)
Default Setting
None
Command Mode
Standard IPv6 ACL