Motorola EX-3524, Cli Reference Manual

Page: 336 / 617

Chapter 13
| Port Mirroring Commands
RSPAN Mirroring Commands
– 336 –
Console#show port monitor
Port Mirroring
-------------------------------------
Destination Port (listen port): Eth1/11
Source Port (monitored port) : Eth1/ 6
Mode :RX/TX
Console#
RSPAN Mirroring Commands
Remote Switched Port Analyzer (RSPAN) allows you to mirror traffic from remote
switches for analysis on a local destination port.
Configuration Guidelines
Take the following steps to configure an RSPAN session:
1.
Use the vlan rspan command to configure a VLAN to use for RSPAN. (Default
VLAN 1 and switch cluster VLAN 4093 are prohibited.)
2.
Use the rspan source command to specify the interfaces and the traffic type
(RX, TX or both) to be monitored.
3.
Use the rspan destination command to specify the destination port for the
traffic mirrored by an RSPAN session.
4.
Use the rspan remote vlan command to specify the VLAN to be used for an
RSPAN session, to specify the switch’s role as a source, intermediate relay, or
destination of the mirrored traffic, and to configure the uplink ports designated
to carry this traffic.
Table 73: RSPAN Commands
Command Function Mode
vlan rspan Creates a VLAN dedicated to carrying RSPAN traffic VC
rspan source Specifies the source port and traffic type to be
mirrored GC
rspan destination Specifies the destination port to monitor the
mirrored traffic GC
rspan remote vlan Specifies the RSPAN VLAN, switch role (source,
intermediate or destination), and the uplink ports GC
no rspan session Deletes a configured RSPAN session GC
show rspan Displays the configuration settings for an RSPAN
session PE