Motorola EX-3524, Cli Reference Manual

Page: 92 / 617

Chapter 4
| System Management Commands
File Management
– 92 –
copy
This command moves (upload/download) a code image or configuration file
between the switch’s flash memory and an FTP/TFTP server. When you save the
system code or configuration settings to a file on an FTP/TFTP server, that file can
later be downloaded to the switch to restore system operation. The success of the
file transfer depends on the accessibility of the FTP/TFTP server and the quality of
the network connection.
Syntax
copy file { file | ftp | running-config | startup-config | tftp }
copy running-config { file | ftp | startup-config | tftp }
copy startup-config { file | ftp | running-config | tftp }
copy tftp { file | https-certificate | public-key | running-config |
startup-config }
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS secure site
certificate.
public-key - Keyword that allows you to copy a SSH key from a TFTP server.
( See “Secure Shell” on page 190. )
running-config - Keyword that allows you to copy to/from the current
running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
◆
The system prompts for data required to complete the copy command.
◆
The destination file name should not contain slashes (\ or /), and the maximum
length for file names is 32 characters for files on the switch or 127 characters for
files on the server. (Valid characters: A-Z, a-z, 0-9, “.”, “-”)
◆
The switch supports only two operation code files, but the maximum number
of user-defined configuration files is 16.
◆
You can use “Factory_Default_Config.cfg” as the source to copy from the
factory default configuration file, but you cannot use it as the destination.