Motorola EX-3524, Cli Reference Manual

Page: 527 / 617

Chapter 23
| Domain Name Service Commands
– 527 –
Default Setting
None
Command Mode
Global Configuration
Command Usage
The listed name servers are queried in the specified sequence until a response is
received, or the end of the list is reached with no response.
Example
This example adds two domain-name servers to the list and then displays the list.
Console(config)#ip name-server 192.168.1.55 10.1.0.55
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
Console#
Related Commands
ip domain-name (525)
ip domain-lookup (524)
ipv6 host
This command creates a static entry in the DNS table that maps a host name to an
IPv6 address. Use the
no form to remove an entry.
Syntax
[ no ] ipv6 host name ipv6-address
name - Name of an IPv6 host. (Range: 1-100 characters)
ipv6-address - Corresponding IPv6 address. This address must be entered
according to RFC 2373 “IPv6 Addressing Architecture,” using 8 colon-
separated 16-bit hexadecimal values. One double colon may be used in the
address to indicate the appropriate number of zeros required to fill the
undefined fields.
Default Setting
No static entries