The new DTMF name and sequence will be listed on the DTMF Codes page.
Modifying a DTMF Code
You can change the name or sequence of a DTMF code by selecting it and clicking
Modify
. Make your
changes and click
Apply
to save them.
Deleting a DTMF Code
To delete one or more DTMF codes, select them from the list and click
Delete
.
SIP Video Settings
SIP video will automatically be included with your SIP calls at the default settings if the phone and PBX
server supports video. Use the SIP Video Settings page to configure the settings for the video that will be
displayed during SIP calls.
Note:
SIP video calls also require you to have configured the SIP audio call settings. For more
The SIP video stream is only supported in the H.264 Format.
1. In the
Max Image Rate
field, enter how many images per second you want the camera to stream over
the SIP call.
2. In the
Max Quality
drop-down list, select the desired image quality level.
Image quality setting of 1 will produce the highest quality video and require the most bandwidth.
3. In the
Max Bitrate
field, enter the maximum bandwidth the SIP video can use.
4. In the
SIP Video Resolution
drop-down list, select the preferred image resolution.
Important:
The SIP video call resolution cannot be set higher than the primary stream
resolution. The only available resolutions to select will be equal to or less than your primary
video resolution setting. If a higher resolution is required, first adjust your primary stream
resolution. For more information, see
. If the
primary stream resolution is reduced to a lower resolution than the SIP Video Resolution, the
SIP resolution will be automatically reduced at the same time.
5. In the
Min Keyframe Interval
field, enter the minimum number of frames between each keyframe.
6. In the video image, click and drag the SIP video zone so that it covers the area of the video image
that you want to display during a SIP call.
Changing the SIP Video Resolution setting will change the size and shape of the SIP video zone.
7. Click
Apply
to save your SIP video settings.
Modifying a DTMF Code
41
