Image and Display
Tip:
Features and options are disabled if they are not supported by the camera.
Important:
Avigilon H4 Multisensor and H5A Dualhead cameras have multiple camera heads in a
single camera. Some settings apply to the camera as a whole, and other settings apply to individual
heads. Certain multi-head camera settings can be set globally for all of the heads on the All Heads
tab, while other settings should be set for each individual head, using the Head 1 to Head 4 tabs.
When configuring an H4 Multisensor or H5A Dualhead camera, be sure to check that you have
configured both the global and the individual head settings.
Note:
If a camera with video analytics or unusual motion detection is physically moved or adjusted,
or if the focus or zoom level is changed, reset the learning progress to provide accurate results. If
the camera's image rate and compression or display settings are updated, the learning progress
may reset automatically.
On the Image and Display page, you can control the camera’s day/night and exposure settings.
The Image and Display page includes an image panel that displays the camera’s live video stream. When
you click
Apply
to save your changes, the video stream is updated to use the new settings.
Below the image panel, the following information is displayed on the right:
l
Current Exposure
l
Current Gain
l
Current Iris
l
Last Known Light Level
Many Avigilon High Definition IP cameras have electronic zoom and focus controls, and you can set the
camera’s zoom and focus through this page as well.
1. Use the
Zoom
slider to adjust the camera’s zoom position.
l
To zoom out, move the slider towards the right.
l
To zoom in, move the slider towards the left.
2. To manually focus the camera, use the
Focus
buttons:
Image and Display
18
