1. To format the SSD, click
Reinitialize Storage
.
2. When the browser displays the following error message, click
OK
:
This will require the ACC ES application to restart and will delete all ACC ES configuration settings
and data. Are you sure you want to continue?
The ACC Server software on the camera restarts. The camera will continue to stream video but will not
record anything until the ACC Server software has finished loading.
Changing the Communication Ports
ACC Server communicates with the ACC Client software through a range of UDP and TCP ports. The port
ranges only need to be changed if the ACC Client software is trying to access two or more instances of the
ACC Server that are behind the same NAT device (e.g. router), or if there is a port conflict.
1. In the Service Ports and RTP Ports area, you can change the Base Port that is used to access the ACC
Server.
2. Click
Apply
.
3. When the browser displays the following error message, click
OK
:
The new service base port or login limits will only take effect once Control Center Server is
restarted. Restart Control Center Server now?
The ACC Server software on the camera restarts. The camera will continue to stream video but will not
record anything until the ACC Server software has finished loading.
Overriding the Login Limit
By default, only 2 users can log in to the site at the same time. If you need extra access for users who will not
be monitoring video, you can override the recommended login limit.
1. In the Login Limit area, select the
Override ACC Client Login Limit
check box.
2. In the
Login Limit:
field, enter how many users you would like to be able to login to the camera site at
the same time.
3. Click
Apply
.
The new setting is saved. More than 2 users can now log in to the camera site.
Note:
If more than 2 users log into the site simultaneously, be aware that this may cause degraded
camera performance depending on the camera settings.
Enabling Storage Management
You must enable Storage Management before you can archive video in the ACC Client software. The
Storage Management page allows you to enable the video archiving feature and set the network location
Changing the Communication Ports
54
