Note:
For cameras with 2 microSD card slots, you will only be able to configure the microSD card
that is inserted first, in either card slot. The second microSD card slot is reserved for future features.
1. On the Storage page, select the
Enable Onboard Storage
check box.
2. By default, the camera is set to only record to the SD card when it is unable to communicate with the
network video management server. If you prefer to have the camera record video to both the
network video management server and to the SD card, clear the
Record only when server
connection is interrupted
check box to disable the setting.
3. Select one of the following recording modes:
l
Continuous:
the camera never stops recording to the SD card.
l
On Motion:
the camera only records when there is motion in the scene.
If you are configuring an Avigilon video analytics camera, the On Motion setting will record
either pixel change in the scene or analytics motion events depending on how the camera is
configured in the Avigilon Control Center Client software.
The recorded video will be divided into files no more than five minutes in length or 100 MB in size.
4. On the Compression and Image Rate page, make sure the format is set to
H.264
to maximize the SD
card recording capacity and performance.
ONVIF Profile G
ONVIF Profile G allows video management systems to retrieve video from a camera's onboard storage
when there is a gap in the VMS video due to a network outage or similar event.
l
Cameras with firmware versions 4.4.0.X or later will have ONVIF Profile G already enabled.
l
Cameras with firmware older than 4.4.0.X will have the option to
Enable ONVIF Profile G
when they
upgrade their firmware.
Note:
Enabling ONVIF Profile G will require reformatting the SD card. You will lose all footage
currently recorded on the SD card. Ensure that you download any required video clips
before enabling Profile G.
Downloading Recorded Video from the Web Interface
Listed in the Recordings section are all the videos that have been recorded to the SD card.
If you are using a CryptR micro card in the camera's SD slot for FIPS level 3 encryption, you will not be able
to use onboard storage in the SD card slot. For camera's with 2 microSD slots you can only use the slots for
either storage or the CryptR micro card, both options cannot be used at the same time.
ONVIF Profile G
33
