PREPARATION BEFORE STARTING MASS PRODUCTION E-15
8)
Move the cursor to SPINDLE OFF MODE "VALID"
to make the spindle OFF mode function valid.
The indicators in the
(STOP) switch and dry
run switch
begin blinking.
The dry run function becomes valid at this time.
9)
Press the single block switch
to make the
single block function valid.
For items 10) and 11) below, determine whether or
not the corresponding function should be used.
10)
Press the optional stop switch
to make the
optional stop function valid.
11)
If the dry run function should be made invalid, for
example to check a milling operation program,
press the dry run switch
to turn the indicator in
the switch off.
For programs in which the cutting feedrate is
expressed as the amount of feed per revolution of
the spindle, a program check is not possible even
if the dry run function is made invalid.
12)
Set the feedrate to be adopted for axis movements
with the OVERRIDE dial.
For the relationship between the OVERRIDE
dial setting and actual feedrate, refer to page
A-42 (5-11).
13)
Make sure that the rapid traverse rate override and
spindle override is set correctly.
14)
Select the memory mode (
) with the mode
selection switch.
15)
Select the turret operation mode by pressing the
head selection switches
(head 1) and
(head 2) simultaneously.
16)
Display the PROGRAM (memory) screen.
17)
Search for the program to be used for machining.
SBK
OSP
BDT
DRN
NOTE
NOTE
100
50
0
150
%
OVERRIDE
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
1
2
