FOR SAFE OPERATION -25-
SO-NL-B17E/O
WARNING
6.
The chuck or fixture that holds the workpiece must be secured to the
spindle using the threaded holes in the spindle nose. Do not mount
another chuck or fixture in a chuck or fixture that is mounted directly
on the spindle. If a workpiece is held by a second chuck or fixture
mounted in this way, it will not be held securely when the spindle
rotates due to the centrifugal force acting on it, and the chuck or
fixture will fly out. This could cause accidents involving serious
injuries or damage to the machine.
If it is necessary to mount a chuck or fixture to hold a workpiece in
the chuck or a fixture which is directly mounted to the spindle,
contact Mori Seiki or the chuck manufacturer for the measures that
should be taken.
