PREPARATION BEFORE STARTING MASS PRODUCTION E-27
28)
Press the
(START) switch to finish the
workpiece.
29)
After finishing the workpiece, measure the
workpiece dimensions again and input the tool wear
offset data.
30)
Start automatic continuous operation after obtaining
the tool wear offset data precisely for all the tools.
Before starting automatic operation:
a.
Invalidate the single block function
b.
Invalidate the optional stop function
c.
Invalidate the coolant off mode
After starting the automatic operation, check the
dimensions of several finished workpieces. The
dimensions will vary slightly due to initial tool
wear, cutting resistance, deflection of cutting tools,
and other factors.
CYCLE
START
STOP
NOTE
