MANUAL OPERATION B-53
12-7
C-axis Jog Feed Operation
While the rotary tool spindle is selected, the C-axis can be fed at the set jog feedrate.
When the rotary tool spindle is selected, the indicator in the MILLING switch
(MIL) is
lit.
1)
Place the DOOR INTERLOCK key-switch in the
NORMAL
position.
2)
Close the front door.
3)
Place the PANEL key-switch in one of the positions
indicated below.
(ON)
(PANEL/EDIT)
4)
Select the jog mode (
) with the MODE selection
switch.
5)
Press the MILLING switch
(MIL).
The rotary tool spindle is selected.
The indicator in the switch is lit.
6)
Press the
(UCL) switch.
The spindle is unclamped.
7)
Set the feedrate to be used for jog feed operation
using the OVERRIDE dial.
Setting is possible in 16 steps in the range of 0 to
3.5 min
−
1
(0 to 1260
°
/min).
DOOR INTERLOCK
NORMAL
RELEASE
ON
PANEL
/EDIT
OFF
PANEL
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
MILLING
SP
UCL
CL
MIL
100
50
0
150
%
OVERRIDE
