WARNING DISPLAY ON TURNING ON POWER
OMA-SC9405-A1E
WARNING DISPLAY ON TURNING ON POWER
The cautions to be observed in order to ensure safe machine operation are indicated on the
caution labels fixed at appropriate locations on the machine. They are also stated in the
Instruction Manual supplied with the machine.
Failure to follow these safety instructions will cause operator injuries and/or damage to the
machine. To impress upon the operator that the safety instructions must be strictly observed, a
message to this effect is displayed on the screen when the power is turned on.
The screen displays the message with the following contents when power is turned on:
The contents of the displayed message may vary depending on NC models.
<Operation procedure>
Before pressing the
[OK]
soft-key, read the message carefully.
1)
Read and understand the contents of the message. Then, press the
[OK]
soft-key.
2)
Turn the power on after that.
For detail of turning on the power, refer to "Turning on the Power" in this manual.
<For weekly timer specification>
In the case of machines equipped with the weekly timer, this message confirmation step after
turning on the power is not required in order to set the machine in the ready status to allow a cycle
start initiated by the weekly timer. In this case, cycle start by using the
(START) switch or
manual operation is not possible.
To start the cycle by using the
(START) switch or operate the machine manually,
carry out the message confirmation step.
(WARNING)
The
machine
is
designed
and
manufactured
for
well-trained
operators
who
have
a
basic
knowledge
of
machine
operation.
DO
NOT
operate
this
machine
unless
this
applies
to
you.
To
avoid
accidents,
you
are
required
to
read
and
understand
the
information
on
the
caution
labels,
in
the
manuals
and
follow
instructions
carefully.
Failure
to
follow
these
instructions
may
result
in
injury,
or
damage
to
the
machine.
Being
aware
of
this
warning,
press
[OK]
soft-key.
NOTE
CAUTION
NOTE
