MANUAL OPERATION B-63
13-6
Removing the Tailstock Spindle Center
The procedure for removing the tailstock spindle center is described here.
Do not carry out machining without the tailstock spindle center.
If coolant enters the tailstock spindle center bearing, it may cause damage to the
machine.
1)
Turn the tailstock spindle center release nut in the
direction it is loosened.
2)
Remove the tailstock spindle center.
WARNING
Before removing the tailstock spindle center, turn off the power supply.
If you attempt to remove the tailstock spindle center while the power is on,
the machine may start operating unexpectedly, and you may be entangled
in its rotating parts or caught by its moving parts and seriously injured.
CAUTION
