OPERATION PANELS A-3
WARNING
Always observe the instructions in
the caution labels stuck to the
machine. Carefully read the Safety
Guidelines supplied with the machine
so that you fully understand them. If
the writing on the labels becomes
illegible, or if the labels are damaged
or peel off, contact Mori Seiki. Also
contact Mori Seiki if you cannot
understand any of the labels. If you
operate the machine without
observing the instructions on the
labels, or without understanding them
properly, you will perform dangerous
and erroneous operations which may
cause accidents involving serious
injuries or damage to the machine.
WARNING
The parameters are set on shipment
in accordance with the machine
specifications; do not change them
without first consulting Mori Seiki. If
you change the parameters without
consultation, the machine may
operate in an unexpected manner,
causing accidents involving serious
injuries or damage to the machine.
1. READ THE INSTRUCTION MANUAL
carefully before installing or operating
the machine.
2. STRICTLY OBSERVE all instructions
written on the caution plates.
3. NEVER OPERATE the machine
without the protective cover,interlock,
or other safety devices in place.
4. NEVER ATTEMPT TO CHANGE the
settings for CNC parameters without
consulting MORI SEIKI
5. The machine starts and moves
automatically,NEVER TOUCH OR
STAND near revolving or moving parts.
6. ALWAYS DISCONNECT the power
source before inspecting,repairing,or
performing maintenance to the
machine.
7. NEVER RE-USE windows or
guards after damage. Replace
promptly with only
recommended products.
FAILURE TO OBSERVE THE ABOVE
INSTRUCTIONS MAY CAUSE SERIOUS
INJURY OR MACHINE DAMAGE.
Never operate without
safety door interlock
switch in “NORMAL”
position.
Failure to do so could
cause serious injury
or
death.
