B-30 MANUAL OPERATION
8)
Set the spindle speed to the minimum value (1% of
the maximum spindle speed) by pressing the
spindle speed setting switch
(decrease) and
the
(STOP) switch at the same time.
The maximum spindle speed varies depending
on the machine model and specifications.
Refer to the MAINTENANCE INFORMATION
for the maximum spindle speed of your
machine.
9)
Close the front door.
10)
Start the spindle.
<Normal direction>
Press the
(NOR) switch.
<Reverse direction>
Press the
(REV) switch.
WARNING
Before starting the spindle in manual
operation, set the lowest available
spindle speed using the spindle
speed setting switch
(decrease)
and the
(STOP) switch. After
starting the spindle, increase the
spindle speed to the required speed
gradually.
When stopping the spindle, first lower
the spindle speed and then stop it.
If the spindle is started at the high
speed setting, the workpiece and
chuck jaws could fly out, causing
serious injuries or damage to the
machine.
NOR
REV
SPJ
STOP
%
SPINDLE OVERRIDE
NOR
SPJ
REV
STOP
