OPERATION PANELS A-47
5-15
Coolant Switches
The coolant switches are used to manually operate the
coolant.
Close the front door before supplying the coolant
so that the coolant will not splash out.
Switch
Function
When this switch is pressed, the indicator in the switch is lit and coolant is
supplied through the nozzles.
When the coolant ON M code is read during automatic operation (MDI, memory,
or tape mode), the indicator in the
(CLTON) switch is lit and coolant is
automatically supplied.
When this switch is pressed while coolant is being supplied, the coolant supply
stops and the indicator in the
(CLTON) switch goes off.
Pressing this switch for 1 second or more while coolant is not being
supplied causes the indicator in the
(CLTON) switch to blink and
the coolant off mode becomes valid.
In this state, the coolant is not supplied even if an M08 command is
executed.
<To cancel the coolant off mode>
1.
Press the
(CLTON) switch.
The indicator in the switch lights and the coolant is supplied.
2.
Press the
(CLTOFF) switch.
The indicator in the
(CLTON) switch goes off and the coolant
is not supplied.
CLTON
CLTOFF
NOTE
CLTON
CLTOFF
NOTE
