Operators Guide
DigiBook 450
77
rel. 2.00-B
08
To produce a milled book, set the milling depth.
09
If you have to produce a not milled book, act on the lev-
erage that allows to lower the milling station.
10
Key the parameters of the book thickness, cover, front
and rear glue stop.
11
Set the required speed
12
Set the glue pressure
13
Set the nipping station pressure
14
Load the book block in the clamp as indicated by the ar-
rows in the picture and press the START button.
15
The machine will draw the cover from the cover feeder, it
will close the clamp, the clamp will start moving passing
over the milling station and the glue station. When the
clamp will reach the right position, the nipping station
will apply the cover. During pressing time the clamp will
remain on the nipping station, the nipping station lows,
the delivery arm take the book and it will release it on the
release belt. In the meantime the clamp will go back to
loading position and another cover will be drawn.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
