Moneris transelect v2000 Operating Manual Download Page 82

Page: 82 / 106

CHAPTER 8: Processing Administrative Functions

Moneris TRANSELECT (V2000) Merchant Operating Manual v.1.1

8.8: Setting Up the Printer (ADMIN 14)

This function allows you to set up and change the printer configuration. It
enables trailer messages on printouts as well as the selection of number of
copies to be printed.

BIN RANGE 3 - LOW

Key in lowest limit of BIN range #3 if applica-
ble and press ENTER.

Press ENTER to leave this blank.

Note:

This is only required if the Third

Party Processor advises of multiple
BIN rages for the same card type.

BIN RANGE 3 - HIGH

Key in highest limit of BIN range #3 if applica-
ble and press ENTER

Press ENTER to leave this blank.

VERIFY MOD - 10?

YES–A NO-C

Press A if Mod 10 check is required

Press C if Mod 10 check is not required

The Third Party Processor provides this infor-
mation

DRAFT CAPTURE?

YES-A NO-C

If you have arranged for electronic deposit
with the Third Party Provider, press A

If you have arranged for “authorization only”
with the Third Party Provider, press C

If NO is selected, a receipt will not be printed
on the terminal.

ENTER NEXT CARD NAME

Key in next Third Party Card name to be
accepted

Press CANCEL/EXIT to return to the READY
prompt

READY

SWIPE CUSTOMER CARD

Press ADMIN key

TERMINAL DISPLAY

OPERATOR'S ACTION

TERMINAL DISPLAY

OPERATOR'S ACTION

READY

SWIPE CUSTOMER CARD

Press ADMIN key

ENTER ADMIN CODE

Key in 14 and press ENTER

TRAILER MESSAGE?

YES–A NO–C

To enable printing trailer on receipts and key in
the trailer message, press A.

To avoid printing a trailer on receipts, press C.
The “NUMBER OF COPIES” prompt appears.

Summary of Contents for transelect v2000











































































































Search results

Summary of Contents for transelect v2000

Reviews:

Related manuals for transelect v2000

Brands by name

Popular brands

Moneris transelect v2000, Operating Manual

Search results

Summary of Contents for transelect v2000

Reviews:

Related manuals for transelect v2000

Brands by name

Popular brands