Moneris TRANSELECT (V2000) Merchant Operating Manual v.1.1
11
CHAPTER 2: Terminal Features and Procedures
GRP PRE-FIX with the number 1. All Clerk ID's that begin with the num-
ber 1 will be reported.
2.2.11: Multiple Terminal Reporting
Multiple Terminal Closing
- Using one transaction, at any of your termi-
nals, you can close one terminal, a group of terminals or all of your termi-
nals (attached to the same merchant number). This feature is activated in
ADMIN 80 and 85; refer to Section 8.
Multiple Deposit Totals
- Use this transaction if you close your terminals
more than once per day. This transaction provides you with the grand totals
of all closed batches for the day.
The Multiple Terminal Close transaction (ADMIN 85)
does not
compare
totals stored in the terminals memory with totals stored in Moneris’ Host
Computer. Therefore, ensure that your receipts balance to the total of your
Multiple Closed Batch.
Note:
The standard Terminal Close transaction (ADMIN 99) compares
terminal totals stored in the terminals memory with totals stored in
Moneris’ Host Computer.
2.2.12: Terminal Name
Key in your terminal name, 1 - 6 characters using numbers or letters. The
same terminal name cannot be used on more than one terminal. You can
identify up to 100 different Terminal Names (this would require 100 differ-
ent Terminals).
2.2.13: Multiple Terminal Reporting In Group
More than one terminal can be defined as a "GROUP” (GRP). A group rep-
resents more than one Terminal ID that shares a common starting charac-
ters (Pre-fix). The number of common starting characters in a group can
vary from 1 to 5. For example, Terminal names, “FRONT 1, FRONT 2",
can be keyed as GRP PRE-FIX with the letter F. All Terminals that begin
with the letter “F” will then report Deposit totals and / or will be closed as a
group.
