Moneris transelect v2000 Operating Manual Download Page 65

Page: 65 / 106

Moneris TRANSELECT (V2000) Merchant Operating Manual v.1.1

CHAPTER 6: Processing ERNEX Transactions

6.6.5: Loyalty Card General Void (ADMIN 56)

This function allows you to void the Loyalty portion of a transaction (pur-
chase, refund, pre-authorization, pre-authorization completion; redemp-
tion, activation). This function does NOT void the debit/credit part (if any)
of these transactions.

Only a transaction in a current batch can be voided. Only one transaction
can be voided at a time.

6.6.6: Deactivating Loyalty Cards (ADMIN 51)

Use this transaction to deactivate a Loyalty Card. This transaction can be
used for lost, stolen or demagnetized cards

Cards can be swiped through the terminal or the card number can be manu-
ally entered. Once a Card has been deactivated, it can NEVER be used
again.

Refer to your Store Manager for your refund or replacement policy.

TERMINAL DISPLAY

OPERATOR ACTIONS

READY

SWIPE CUSTOMER CARD

Press ADMIN key.

ENTER ADMIN CODE

Enter 56 and press ENTER.

ERNEX VOID

SWIPE ADMIN CARD

Swipe Admin Card

ERNEX VOID

SWIPE CARD

Swipe Loyalty Card

ERNEX REFERENCE NO.

Enter original ERNEX reference number from
transaction being voided and press ENTER

DIALING/SENDING/

RECEIVING

Please wait

ERNEX PRESS ENTER

APPROVED

Press ENTER then press CANCEL/EXIT key
to return to READY prompt.

TERMINAL DISPLAY

OPERATOR ACTIONS

READY

SWIPE CUSTOMER CARD

Press ADMIN key.

ENTER ADMIN CODE

Enter 51 and press ENTER.

ACTIVATE CARD - A

DEACTIVATE CARD - C

Press C

DEACTIVATE CARD

ENTER CARD NUMBER

Swipe Loyalty Card if present OR
Enter Loyalty Card number and press ENTER

DIALING/SENDING/

RECEIVING

Please wait

Summary of Contents for transelect v2000











































































































Search results

Summary of Contents for transelect v2000

Reviews:

Related manuals for transelect v2000

Brands by name

Popular brands

Moneris transelect v2000, Operating Manual

Search results

Summary of Contents for transelect v2000

Reviews:

Related manuals for transelect v2000

Brands by name

Popular brands