Mobatime DSC. 250.4 Instruction Manual Download

Page: 140 / 144

www.mobatime.com

140

BE-801372.01-Digital_clocks_manual-221114

©MOBATIME

GUARANTEE

•

The device fulfils the requirements of the following norms:

–

Electrical safety:

EN 62368‑1

– EMC:

EN 55032, EN 55024, EN 50121‑4

•

The device has been developed and manufactured in accordance with government regulations:

2014/35/EU (LVD), 2014/30/EU (EMC), 2014/53/EU (RED), 2011/65/EU (RoHS), 2012/19/EU (WEEE)

•

The device is intended for a normal operational environment according to the corresponding

norm.

• The following circumstances are excluded from the guarantee:

–

inappropriate handling or interventions

– chemical influences

–

mechanical defects

– external environmental influences (natural catastrophes, etc.)

• Repairs during and after guarantee period are assured by the manufacturer.

Summary of Contents for DSC. 250.4

















































































































































Search results

Summary of Contents for DSC. 250.4

Reviews:

Related manuals for DSC. 250.4

Brands by name

Popular brands

Mobatime DSC. 250.4, Instruction Manual

Search results

Summary of Contents for DSC. 250.4

Reviews:

Related manuals for DSC. 250.4

Brands by name

Popular brands