Mobatime DSC. 250.4 Instruction Manual Download

Page: 60 / 144

www.mobatime.com

BE-801372.01-Digital_clocks_manual-221114

©MOBATIME

7.3

7.3.1

Description

Basic features

•

digits of 20, 57, 75, 100, 180 or 250 mm height, which corresponds to readability distance of 9, 25,

32, 40, 70 or 100 m.

•

digits in red, pure green blue, yellow, white and green color

•

display composed of 7‑segment LEDs (SMD LEDs for certain models on request)

•

manual or automatic adjustment of the luminosity of LED diodes

•

altering time, date and temperature display with adjustable time period

•

time display format in four digits (HH : MM) or six digits (HH : MM

or HH : MM : SS), 12 or 24‑hour

cycle

•

date display format in four digits (DD. MM.) or six digits (DD. MM.

or DD. MM. YY)

•

AM/PM indication for 12‑hour cycle (not available for DC.20)

•

temperature display in °C or °F (providing the temperature sensor is connected)

•

TEMP connector is used to connect temperature sensors or stopwatch control

Mechanic

• clock frame made of anodized aluminium in black or silver color, powder coated
•

anti‑reflection front cover made of plexiglass

• single or double sided design
•

wall mounting (only for single sided design), ceiling suspension or wall bracket mounting

•

panel or rack mounting (DC.20)

•

push buttons placed on the upper side of the clock frame

•

protection degree IP 40 (IP 54 on request)

• working temperature 0 to +50 °C

Synchronization

•

autonomous operation with internal quartz time base

•

accuracy ±0.1 s/day without synchronization (after 24 hours of synchronization at constant

temperature)

•

NTP multicast or unicast synchronization, Ethernet or WiFi network, PoE or mains powered

•

slave clock operation with synchronization by MOBATIME, serial code, MOBALine, DCF, impulse line

or by IRIG‑B, mains powered

•

RTC backup with supercapacitor (lithium battery on request)

Configuration

•

setting of the clock parameters and time / date by means of push buttons or IR remote control

Networkconnectionoptions

•

IPv4 and IPv6 support

•

DHCPv4, DHCPv6 / manual configuration of the clock parameters or configuration via web interface

•

DHCPv4, DHCPv6 private strings allow easy configuration of the clock parameters when connected

to LAN

Summary of Contents for DSC. 250.4

















































































































































Search results

Summary of Contents for DSC. 250.4

Reviews:

Related manuals for DSC. 250.4

Brands by name

Popular brands

Mobatime DSC. 250.4, Instruction Manual

Search results

Summary of Contents for DSC. 250.4

Reviews:

Related manuals for DSC. 250.4

Brands by name

Popular brands